Divis CHD12004H User Manual Download

Page: 23 / 85

Digital Video Recorder User Manual

the main menu. Click Setup icon will pop-up the configuration menu:

Fig 4.2 Main Menu Configuration Menu

4.1 Basic Configuration

Basic configuration includes three sub menus: system, date & time, and DST.

4.1.1 System

Step 1:

Enter into system configuration



basic configuration



system.

Step 2:

In this interface, user can setup the device name, device ID, video format, max online users, Video Output and

language, Screensaver and so on. The definitions for every parameters display as below:

Device Name:

Name of the device. It may display on the client end or CMS that help user to recognize the device

remotely.

Video Format:

Two modes: NTSC and PAL. User can select the video format according to the camera.

Password Check:

Enable this option. User needs to input user name and password to do corresponding operations with

the relevant right in system configuration.

Show System Time:

Displays time in live.

Startup Wizard:

Tick off this item and it will display an opening wizard with time zone and time setup information.

Summary of Contents for CHD12004H





















































































Search results

Summary of Contents for CHD12004H

Reviews:

Related manuals for CHD12004H

Brands by name

Popular brands

Divis CHD12004H, User Manual

Search results

Summary of Contents for CHD12004H

Reviews:

Related manuals for CHD12004H

Brands by name

Popular brands