FILLING
FROM:
PARENT
NITROGEN
CYLINDER
DRAIN KAT
llustration #3
FA-03 CO
2
to CO
2
ADAPTOR
FA-01 NITROGEN to CO
2
ADAPTOR
FA-01
M x M Nitrogen to CO
2
Adapter
FA-03
F x F CO
2
to CO
2
Adapter
Warnings
• This product contains chemicals, including lead, or otherwise known to the State
of California to cause cancer, birth defects, and other reproductive harm. Wash
hands after handling (California Health & Safety Code § 25249.5 et seq.)
• Caution: cylinders are highly pressurized. Always handle with care. Never allow
cylinders to be dropped, knocked over or subjected to excessive heat.
• Never stand in front of or behind a regulator or tank when opening the cylinder
valve. Always stand so that the cylinder is between you and the regulator.
• Do not use the regulator if there are any damaged parts on the regulator, cylinder,
or valve.
• Regulator outlet pressure must not be greater than 400 psi when using the blow
gun. This is the maximum pressure rating for the blow gun. Regulator outlet pressure
must not exceed 30 psi when using the QN-S3 tip.
Included Accessories
QN-S3
This accessory is used to remove compressed dirt and debris from
a coil. To use this accessory, connect the QN-S3 to the tip of the
blow gun. Do not exceed 30psi. C0
2
or Nitrogen can be used.
QN-S3
BLOW GUN
HOSE FROM
DRAINKAT
TM
