CO
2
and Nitrogen Filling
CARBON DIOXIDE (CO
2
) FILLING:
1. Disconnect hose and unscrew regulator from the DrainKat.
2. Turn over and vent off any remaining contents from the DrainKat. This can be an
effective way to pre-chill the cylinder – see warning below.
3. Weigh the small cylinder, and record the tare weight.
OPERATOR’S TIP: Slightly open the valve of the parent cylinder at this point to
vent off any vaporized CO
2
in the dip tube. Within 5 seconds a white snow like
discharge indicates liquid CO
2
is available to be transfilled. Vapor type cylinders
will have to be inverted to extract liquid. (See illustration #2.)
MBK-6 DrainKat™
Instructions
The MBK-6 DrainKat™ condensate
drain line cleaning kit uses a dry
nitrogen or CO
2
charge to clear
drain line clogs. The Drain Kat
also uses the included blow gun
in conjunction with the QN-S3
to clean off dirt and debris from
HVAC coils.
FILLING
FROM:
PARENT CO
2
DIP TUBE
CYLINDER
DIP TUBE or SIPHON TUBE
VAPOR CARBON DIOXIDE (CO
2
)
LIQUID CARBON DIOXIDE (CO
2
)
FA-03 CO
2
x CO
2
ADAPTOR
DRAIN KAT
llustration #1
