Diversified Power International Accusense Charge 1-48C017C Series, Instruction Manual

Page: 6 / 14

6
DANGER: RISK OF ELECTRIC SHOCK! DO NOT TOUCH ANY
UNINSULATED PARTS OF THE CHARGER OUTPUT CONNECTOR,
BATTERY CONNECTOR, OR BATTERY TERMINALS.
DANGER: VISUALLY AND MANUALLY INSPECT TO VERIFY THAT
THE DC OUTPUT CORD SET, PLUG AND BATTERY CHARGING
RECEPTACLE ARE IN GOOD WORKING CONDITION BEFORE EACH
AND EVERY USE AND DO NOT USE THE CHARGER IF:
•
The DC charging receptacle does not grip the DC cord set plug tightly,
is loose or does not make a good electrical connection.
•
The DC cord set plug or charging receptacle feel hotter than normal.
•
The DC cord set plug blades or charging receptacle contacts are bent,
corroded or are dark or bluish in appearance.
•
The DC cord set plug, cords, receptacle or equipment charging wiring
are cut, worn, broken or have any exposed conductors.
•
The DC cord set plug, cords, charger or receptacles are damaged or
distressed in any way.
Using the charger with any of the above symptoms could result in a fire,
property damage or personal injury.
Have your distributor, dealer or other qualified service agent, repair or
replace worn or damaged parts immediately.
Repairs should not be
attempted by people who are not qualified.
6.2 Connect the DC cord set plug to the charging receptacle by grasping
the plug body or handle and pushing the plug straight into the
receptacle. Then connect charger’s AC cord set to AC power. The
charger will start automatically in approximately three (3) seconds.
WARNING: DO NOT DISCONNECT THE DC CORD SET PLUG
FROM THE CHARGING RECEPTACLE WHEN THE CHARGER IS ON.
THE RESULTING ARCING AND BURNING OF THE PLUG AND
RECEPTACLE COULD CAUSE THE BATTERIES TO EXPLODE. IF THE
CHARGER MUST BE STOPPED, FIRST DISCONNECT THE AC
POWER SUPPLY CORD FROM ITS AC OUTLET, AND THEN
DISCONNECT THE CHARGER DC CORD SET PLUG FROM THE
CHARGING RECEPTACLE.