13. Insert the Retainer Housing into the Handwheel and torque this to 86 in lbs/100 kgf cm/9.7 Nm
using a 4mm hex. Take the Shutter Crown (D4) and install first one Washer (D5*) the Spring (D6) and
the second Washer (D5*) inside the Shutter Crown - Fig. 49.
Fig. 49
14. Slide the Shutter Crown assembly onto the Retainer Housing - Fig. 50
. It is best to do this as
illustrated or even hold the reg upside down and slide the crown up into it to prevent the
washers/spring from falling out.
Fig. 50
Summary of Contents for DGX Gears XTRA
Page 1: ...DGX Gears XTRA First Stage Service Manual...
Page 32: ......
