9. Install the HP Seat Retainer into the Body and torque this to 130 in lbs/150 kgf cm/15 Nm - Fig. 45.
Fig. 45
10. Once the HP Seat Retainer is torqued to its proper specification, install the rubber End Cap (34)
onto the regulator body. Orient the groove in the side to line up with the DIN Inlet on the Body - Fig. 46.
Fig. 46
Summary of Contents for DGX Gears XTRA
Page 1: ...DGX Gears XTRA First Stage Service Manual...
Page 32: ......
