5. Carefully slide the Piston Assembly into the End Cap/Port Swivel Assembly – Fig. 37. Using the
previously assembled Washer/O-ring/Teflon Washer stack, insert the stack into the HP side of the
regulator Body (11), as shown on the schematic. Slightly twist the tool, and the stack will come off in
the body - Fig. 38.
Fig. 37 Fig. 38
6. Reverse the tool to hold the stack and protect the Piston end - Fig. 39. Insert the Piston/End Cap/Port
Swivel assembly into the Body and screw it on hand tight - Fig. 40.
Fig. 39 Fig. 40
Summary of Contents for DGX Gears XTRA
Page 1: ...DGX Gears XTRA First Stage Service Manual...
Page 32: ......
