4. First Stage Disassembly
(1)
Ensure the system is depressurized. Document the position of all hoses and port plugs. The use of
small, clean containers to hold parts is recommended.
(2) In the following steps, the part numbers from the schematic will be used with their description. The
numbers on the photos also correspond with the parts list on the schematic. Items in the service kits
are identified in the same way. Have the schematic in front of you while following the instructions. Be
sure to keep all old parts organized and separate from new ones in the service kit. The old washers and
O-rings marked with an asterisk (*) will be replaced with new ones from the service kit and the
remaining parts will be cleaned and reused.
1. Remove all hoses and port plugs (21, 24) with O-rings (22*, 25*) – Fig. 7.
Fig. 7
2. Remove the Shutter Valve (D2) using a 4mm hex and Shutter Crown (D4), which contains the Spring
(D6) and two small nylon Washers (D5*) – Fig. 8.
Fig. 8
Summary of Contents for DGX Gears XTRA
Page 1: ...DGX Gears XTRA First Stage Service Manual...
Page 32: ......
