10. With side-cutting snips, carefully cut the Tie Wrap (02*) holding the Mouthpiece (03) - Fig. 20.
Remove the Mouthpiece and check that the Main Housing (01), Exhaust Cover (12) and Exhaust Valve
(11*) are undamaged and free of debris.
The Exhaust Cover is not usually removed during service.
The cover is fitted in such a way at the factory that removing it is likely to damage the Cover. Removal
may also damage the flange that holds it in place
- Fig. 21.
Fig. 20 Fig. 21
If removal (to replace the Exhaust Valve) is necessary, soak the Main Housing and Exhaust Cover
together in hot tap water for three minutes to soften the Cover. Then peel the wings from each side of
the Main Housing flange and slide the Exhaust Cover down and off.
This completes the disassembly of the D6 Second Stage
.
Summary of Contents for DGX Gears D6
Page 1: ...DGX Gears D6 Second Stage Service Manual...
Page 32: ......
