11.0 Application instructions
Fig. 5
12
8
10
6
6
6
Fig. 6
Fig. 7
16
11.0 Application instructions
11.0 Application instructions
11.0 Application instructions
11.0 Application instructions
USAGE
11.1 Switching on the device
In order to switch on the device, press the key ( ). The blue
display backlighting switches on and the device is now run in the
basic mode. If you switch on the device for the first time, the
display information corresponds to
Fig. 5
: The device is now run in
the programme 1 (
P01
) of the
TENS
mode ( flashes). If you
have already used the device, the programme used last before the
device has been switched off is shown.
11.2 Programme setting TENS mode
Press the key
(T)
in order to select the
TENS mode
. The
TENS
mode
is activated and information, as shown in
Fig. 5
, appears on
the display: The device is now run in programme 1 (
P01
) of the
TENS
mode ( flashes at the top on the left of the display).
In the
TENS mode
, there are a total of 12 programmes (7 pre-
programmed programmes
P01 - P07
as well as 5 individual
programmes
U1 - U5
whose parameters can be set by the users
themselves (see programme tables, page 22). In the
TENS mode
,
press the key
(P/II)
repeatedly in order to first call the
programmes
P01 - P07
one after the other and then the
programmes
U1 - U5
. After programme
U5
, the programme order
starts from the beginning with
P01, P02
etc.
11.3 Programme setting EMS mode
Press the key
(E)
in order to select the
EMS mode
. The
EMS
mode
is activated and information, as shown in
Fig. 6
, appears on
the display: The device is now run in programme 1 (
P01
) of the
EMS
mode ( flashes at the top in the middle of the display).
In the
EMS mode
, there are a total of 20 programmes (11 pre-
programmed programmes
P01 - P11
as well as 9 individual
programmes
U1 - U9
whose parameters can be set by the users
themselves (see programme tables, page 23). In the
EMS mode
,
press the key
(P/II)
repeatedly in order to first call the
programmes
P01 - P11
one after the other and then the
programmes
U1 - U9
. After programme
U9
, the programme order
starts from the beginning with
P01, P02
etc.
11.4 Programme setting MASSAGE mode
Press the key
(M)
in order to select the
MASSAGE mode
. The
MASSAGE mode
is
activated and information, as shown in
Fig. 7
, appears on the display: The device is now
run in programme 1 (
P01
) of the
MASSAGE
mode ( flashes at the top on the right
of the display). In the
MASSAGE mode
, there are 10 programmes
P01 - P10
(see
programme table, page 24 - 25) which are all pre-programmed. In the
MASSAGE mode
,
press the key
(P/II)
repeatedly in order to first call the programmes
P01 - P10
.
After programme
P10
, the programme order starts from the beginning with
P01, P02
etc.
GB
4. PJN157-14_GA-GB_HHD_TEN250_31.03.14
Montag, 31. M
rz 2014 12:10:42
