11.1
11.2
11.3
11.4
11.5
34
Make sure that the optical sensors of the
device are free of dirt. Only in this way can
accurate measurement results be ensured.
After cleaning, store the device at room
temperature at a clean and dry location. Do
not expose the device to extreme
temperatures, humidity, direct sunlight or
shocks!
For disinfection, a suitable commercial
disinfectant or 75 % alcohol can be used.
Afterwards, let the device dry completely.
Do not immerse the pulse oximeter in water
or any other fluids! Do not pour any fluids
on the device and ensure that no cleaning
agents remain on the device.
Always keep the surface of the device free
from dust and dirt. Prior to cleaning the
device, switch it off and remove the
batteries. To clean the housing, use a dry,
soft cloth. In case of heavier soiling, clean
the device with a slightly dampened cloth
with some mild cleaning agent. Afterwards,
let the device dry completely. Do not
attempt to clean the device using abrasives,
benzene or solvents! Make sure that no
fluids can enter the device!
11.0 Cleaning and care
CLEANING AND CARE
GB
