1
22
Fig. 5
Fig. 4
9
6
6
6
7
8
Step 2: Press the ON/OFF button to
activate the measurement process. "Oximeter"
appears briefly on the display and the
measurement is started. After approx. 8 seconds,
the determined arterial oxygen saturation levels
(%SpO2) and the pulse rate are displayed
as well as the pulse intensity wave diagram
(plethysmograph) and bar graph on the
display (refer to fig. 5). As long as the device
remains attached to the finger, the measurements
are continuously updated.
NOTE: During the measurement, stay calm and
do not move the finger as this may lead to
incorrect measurements.
Step 1: Open the device like a clothes peg, insert
a finger completely into the opening (refer to fig.
4) and close the device by releasing the back. The
device is now securely attached to the finger.
NOTE: Please note that the finger must be
inserted with the finger nail facing upwards
(towards the display side)!
8.0 Device operation
APPLICATION
GB
