background image

GB

A L L R O U N D   G R I N D E R

3

Prior to using the grinder

After unpacking as well as prior to each use, 
check if the grinder or the power cord show any 
signs of damage.

If there is damage, do not use the grinder, but 
instead notify your dealer.

These Operating Instructions comply with valid 
EU standards and regulations. Also observe 
country-specific guidelines and laws outside 
Switzerland!

ATTENTION:  Each  grinder  is  tested  in  the

factory, including grinding coffee. Therefore

there can be ground coffee residues

inside the grind chamber which could fall

out during transport.

Please read through the safety instruc-
tions and Operating Instructions care-
fully prior to initial use. This is the only 

way to ensure that all features are used safely 
and reliably.
Store these Operating Instructions in a safe place 
and also pass it on to any subsequent owner.

Scope of supply

 

– Coffee grinder

 

– Hopper with lid

 

– Operating Instructions

The following parts are located in the hopper:

 

– Grounds  bin

 

– Port-a-filter holder

 

– Residue  tray

 

– Screw  driver

 

– Cleaner brush

Check if the shipment is complete and undam-
aged. If a part is missing or defective, please 
contact your dealer.

For Your Safety

Symbols

Severe risk!

Failure to observe this warning can lead 
to physical injury or death.

Medium level of risk!

Failure to observe this warning may 
cause material damage.

Slight risk!

Instructions  which  should  be  observed 
when using the grinder.

Safety warnings

Hazardous voltage!

Faulty electrical installation or exces-
sive line voltage may result in an electric 

shock.

 

– Only use the grinder if the line voltage match-

es the specifications on the nameplate. 

 

– Regularly check the grinder and cables for 

damage. Do not operate the grinder if it is 
damaged or the power cable or the plug are 
damaged.

 

– If the power cable of this grinder is damaged, 

it must be replaced by the manufacturer or its 
customer service or a person having similar 
qualifications in order to avoid risks.

 

– Connect the grinder only to a correctly ground-

ed power outlet. If you are unsure, because it 
can be seen that the earthing contacts or the 
power outlet have, for instance, been painted 
over, in the interests of your own safety have 
the power outlet checked by a qualified pro-
fessional.

 

– Do not open the casing yourself; only allow the 

repair  to  be  done  by  authorized  specialists. 
Contact an authorized customer service work-
shop  or  your  dealer  in  such  cases.  Warranty 
and liability claims are excluded in the event 

TAKE CARE

DANGER

ATTENTION

DANGER

Summary of Contents for ProD

















Reviews: