GB
A L L R O U N D G R I N D E R
12
Technical data
Designation
ProD
Operating voltage
or
200-240V/50/60Hz (e.g. Europe)
100-115 V/50/60 Hz (e.g. USA, Canada, Japan)
Speed
1650-1850 rpm
Grinding capacity at
200-240 V; 50/60 Hz
100-115 V; 50/60 Hz
1,9-8,7 g/s (fine to coarse)
1.3-7.5 g/s (fine to coarse)
Sound pressure level
60 dB when running empty
80 dB when grinding
maximum permitted operating
time
S3 20% (e.g. 6s ON, 24s OFF).
Dimensions W x H x D in mm
162 x 370 x 270
Weight
6 kg
Capacity of the hopper
Approx. 260 g
Troubleshooting
The following information should help you deal with operational problems. If you are unsuccessful,
please obtain the help of an authorized service partner.
Problem
Cause
Solution
The grinder does
not start. The indi-
cator lamp
g
does
not light up.
The plug is not
plugged in or there
is no electricity
supply to the power
socket.
Insert the plug into the socket or plug the grinder into
another socket.
The fuse is blown.
1. Pull out the plug.
2. Using the supplied screw driver screw out the
bracket holding the fuse on the bottom of the
grinder.
3. Replace the fuse with a new one of the type
"T6/250."
4. Screw the fuse bracket back in.
