Ditch Witch RT80Q, Operator'S Manual

Page: 66 / 207

RT80Q Operator’s Manual
Operation Overview - 65
Sawing
Sawing
1. Start unit. See page 74.
2. Position tractor and controls. See page 110.
3. Begin sawing. See page 112.
4. Complete the installation. See page 137.
5. Backfill the trench. See page 138.
6. Shut down tractor. See page 78.
Digging with Backhoe
1. Start unit. See page 74.
2. Set stabilizers and unstow backhoe. See page 114.
3. Excavate. See page 115.
4. Stow backhoe properly. See page 116.
5. Shut down tractor. See page 78.
Drilling
1. Start unit. See page 74.
2. Dig approach trench and target trench. See page 118.
3. Assemble drill string and position tractor. See page 118.
4. Begin drilling. See page 121.
5. Use drill string guide as needed. See page 122.
6. Add rod. See page 123.
7. Backream. See page 124.
8. Shut down tractor. See page 78.
9. Disassemble joints. See page 128.
Leaving Jobsite
1. Backfill if necessary. See page 138.
2. Rinse equipment. See page 138.
3. Stow tools. See page 138.
4. Haul equipment from jobsite. See page 86.