Distform MyChef 10 GN 1/1, Installation, Use And Maintenance Manual, Page: 30 / 63

151
ENGLISH
Figure 30: Example of program 2, with four phases, and phase 2 is active.
The active phase will blink, and, when it is blinking, the others will remain
marked.
It is possible to add or delete phases to the program during the last phase.
7.7.2 Adding a phase
To add a phase, briefly press the button until ADD appears in the program
display. Confirm the addition of a phase by holding down the button.
Figure 31: Adding a phase.
Once a phase has been added, the phase’s cooking settings can be changed as
specified in the previous subsections.
7.7.3 Deleting a phase
To delete a phase, briefly press the button until DEL appears in the program
display. Confirm the addition of a phase by holding down the button.
Figure 32: Deleting a phase.