SYSTEM CONNECTION
Connect the
TV
Scart
interface or the video terminal of this machine with the corresponding interface or
Adjust the direction of the dish according to the antenna signal level of infor bar displaying on the screen
Connect
F
terminal to both ends of the cable, one end to
LNB
of satellite antenna and the other end to
“
ANT
IN
” input terminal of this unit
Please make sure that the
F
terminals are connected well
Do not bind or bundle antenna cable with power line together in case influencing the reception
POWER ON
Plug the terminal of power
DC 12V
that comes from the adaptor into the power plughole of this local to
Press the [
POWER
]
key on the remote control to the remote receiving window of the device or the standby
key on the local, which enters its standby mode
Re-press the key, the device recovers to its normal
When the receiver is staying on the standby mode, the
indicator lights up
6
Insert the infrared component when necessary, if so, the same time, the remote sensor and the sensor
of infrared component can both work
terminal of TV set
get the power connection
Summary of Contents for S9000
Page 9: ...MENU TREE 7 ...
