Dish TV S9000, Operation Manual

Page: 11 / 20

Finish all the above operation; it is time to scan the channels,
if the scan is rescan on
Sat , there will appear a
“ warning ” dialog box: YES , to rescan; NO , to cancel
The scanning interface shows us as next page
9
Channel Scan: light the second tape [Channel Scan], press the key [OK] to enter
Light the first instruction [Satellite], press the </> key to choose one the satellite or press the OK key to display
the satellite bar to pick. If the type of the DiSEqC in the ANTENNA SETTING is set on motor, then the instruction
[Motor Position] owns the selectivity. Press the </> key to set
=>E: to drive the dish eastwards
=>W: to drive the dish westwards
light the Scan Type, In which: ALL, FTA, Scrambled: ALL: to scan all the channels in the selecting satellite; FTA:
to scan the channels, which belong to the [Free To Air]; Scrambled: to scan the scrambled channel
NIT Search: to scan the channels, which are, belong to the network
Light the Scan Mode: Sat: to scan the channels in the selecting satellite; TP: to scan the channels on the present
TP; Manual: to scan the channel by operator
Finish scanning, if the channel has been stored then the
interface returns to the program-watching's
Enter SMATV Setting submenu, the image shows as:
SMATV refers that several users share the same antenna.
Connect the machine to the SMATV network and input the
symbol rate of the transponder. Move the cursor to the fifth
strip and press
OK key to start the scanning.
Light the Edit Satellite tape and force down the OK key to
enter (image, next page)
Del : Press the
red
key , the dialog box with “ warning ”
display, force down the “ Yes ” instruction to delete and
SMATV SCAN
EDIT SATELLITE
the “ No ” to abandon