INSTALLATION
shows as
Move the cursor to the
Installation
menu tape and press the
OK
key, the image shows as
Press the
MENU
key on non-menu mode and the image
8
Press the
[red key]
repeatedly to alternate the type of language
Antenna Setting
Light the
LNB
Freq
Type
to select one suitable preinstalled
parameter (
C Band, Single Sol., Ku Band, Universal
)
or, pitch on the
User Defined
to install the
LNB Freq Low
and
LNB Freq High
parameters according to the value of
H
ighlight the instrcution [LNB Index(1..8)], press the </> key to
opt one correct type, or, further,
tuner on the antenna by forcing down the digit-keys. Press the OK key to display the Warning dialog box to
save or cancel the parameter installation by choosing the YES or NO instruction.
E.g, provided that there have parameter of [local oscillation] indicating as 5.15GHz, then you should set the
[LNB Freq Type] as [C Band, LNB Freq Low 5150& LNB Freq High5150]; provided that the indicating parameter
is 10.75GHz, then you should set the [LNB Freq Type] as [Ku Band, LNB Freq Low 10750& LNB Freq
High10750]
Light the DiSEqC tape to opt the suitable port (port1, port2, port3, port4, Motor, None) through pressing the </>
key. The port must be same to the actual satellite signal inputting terminal
Attention:
LNB Power: Single mode: keep the status on “on”
Loop situation: keep the status of the machine which
connected the satellite signal on the “on” and others on the
“off”
Press the EXIT key to return to the FAST SCAN interface.
After setting the LNB parameter, move the cursor onto the
instruction [Start Scan], press the key [OK] to commence the
process of scanning. After the process, the machine will save
all the scanned channel and return the interface to the
program-watching's
Summary of Contents for S9000
Page 9: ...MENU TREE 7 ...
