manualshive.com logo in svg

Dish Network DuoDVR ViP 722k, User Manual

Share
Download
Dish Network DuoDVR ViP 722k User Manual Download Page 22

 12

Satellite Receiver Overview

Chapter 2

S

ATELLITE 

R

ECEIVER 

O

VERVIEW

This section gives you an overview of your DISH satellite TV receiver system.

Satellite Receiver

This dual-tuner satellite receiver with integrated digital video recorder can view/record 
high-definition (HD) and standard-definition (SD) DISH programming on two TVs, or view/
record over-the-air digital/HD broadcasts on the nearby HDTV.

•

Nearby TV (TV1)—Connect to an HDTV to view SD and HD DISH programming and 
over-the-air digital/HD broadcasts. Programming from the receiver is delivered to the 
nearby TV using one or more audio/video interconnect cables.

•

Remote TV(s) (TV2)—Connect to an SDTV to view SD and down-converted HD 
broadcasts. Programming from the receiver is usually delivered to the remote TV(s) 
using existing in-home coaxial cable connections.

Remote Controls

Two remote controls come with your receiver: 

•

Remote Control 1—An Infrared (IR) remote to control programming for the nearby TV 
(TV1). This remote control is labeled with a green number 1, which matches similar 
markings on the receiver output connections and the menus for the nearby TV. 

•

Remote Control 2—An Ultra-High Frequency Pro (UHF Pro) remote to control 
programming for a remote TV (TV2). This remote control is labeled with a blue 
number 2, which matches similar markings on the receiver output connections and the 
menus for the remote TV. Be sure to set up the remote control to operate the receiver 
(see page 75).

Summary of Contents for DuoDVR ViP 722k












































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands