manualshive.com logo in svg

Dish Network DuoDVR ViP 722k, User Manual

Share
Download
Dish Network DuoDVR ViP 722k User Manual Download Page 120

 110

Tips

Chapter 11

T

IPS

•

To take full advantage of Dolby Digital 5.1 surround sound, you need a digital optical 
audio cable and audio equipment that supports this feature.

•

To use the Caller ID feature on this receiver, be sure to have the receiver connected to 
an active phone line and have Caller ID service from your phone company.

Q

UESTIONS

•

How can I see who has called me in the past?

 Open your Caller ID History by 

pressing the MENU button, selecting 

System Setup,

 and then 

Caller ID History

.

•

Why is my audio in another language?

 An alternate language may have been 

selected. See the instructions on page 105 to change your preferred language.

•

How can I change the channel order in the Program Guide?

 You can switch from 

ascending order (lowest numbered to highest) to descending order (highest numbered 
to lowest) or back, by following the instructions on page 103.

Summary of Contents for DuoDVR ViP 722k












































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands