Dish Network 196812, User Manual

Page: 67 / 137

Receiver Customization
57
Operating Other Devices
Enabling and Disabling SAT Auto-Tune
Note
: SAT Auto-Tune is enabled by default; however, the channel must be set (see
Setting SAT Auto-Tune Channel ).
1 Press and hold SAT for three seconds until all four Mode buttons are lit.
2
Press STAR (*).
3 Press VOLUME UP to enable SAT Auto-Tune or VOLUME DOWN to disable.
4
Press POUND (#).
Removing SAT Auto-Tune Channel
1
Press and hold TV until it stays lit.
2 Press STAR (*).
3
Enter 00 or 000.
4 Press POUND (#).