6
S
WITCHING
B
ETWEEN
TV
AND
A
MPLIFIER
V
OLUME
C
ONTROL
When the remote control is set up to operate your TV, the
MUTE
and
VOLUME
buttons will adjust your TV volume. To use the remote to
adjust the volume of a remote-controllable audio receiver or amplifier
instead of adjusting the TV’s volume setting, use the steps in the left
column of the table. To switch back to controlling the TV’s volume,
use the steps in the right column of the table.
7
Turn the equipment back
on and try some other
buttons to make sure they
work.
Press
POWER
to turn the
equipment back on. Try some
other buttons to make sure they
work. Sometimes
POWER
works when other buttons
don’t, and more than one code
may work to turn equipment on
or off.
8
If necessary, repeat this
procedure until you’ve tried
all the codes.
You may need to repeat the scan
to find the best code for your
equipment.
Control Amplifier Volume
Control TV Volume
1
Press and hold the
AUX
mode button until all mode
buttons are lit, then release
it. The
AUX
mode button
will blink.
1
Press and hold the
TV
mode button until all mode
buttons are lit, then release
it. The
TV
mode button will
blink.
2
Press the
POUND
(
#
)
button.
2
Press the
POUND
(
#
)
button.
3
Press the plus (+) side of
the
VOLUME
button.
3
Press the plus (+) side of
the
VOLUME
button.
4
Press the
0
number button.
4
Press the
0
number button.
5
Press the
POUND
(
#
)
button. The
AUX
mode
button flashes three times.
5
Press the
POUND
(
#
)
button. The
TV
mode
button flashes three times.
Instructions
Additional Information
