Bluetooth Pairing and Connection
This process is required the first time you use the JAG97CD-HF. After initial
pairing, the JAG97CD-HF will automatically reconnect with smartphone upon
entering vehicle.
1.
Turn vehicle ignition to “ON”.
2.
Red LED inside module will begin to flash
3.
Access smartphone Bluetooth menu settings, and search (scan) for
devices.
4.
Select the G2 and tap
“Connect”
Note: Pairs up to 4 phones but connects to one phone at a time.
Caller ID and text are
not shown on radio display
. Operate
Bluetooth device by pressing push-to-talk button, VR (voice
recognition) or audio deice built-in controls. Use radio
volume button to control playback level.
Bluetooth Operation
1.
Turn ignition and r
adio “ON
.
2.
Press “
CD
” button on radio.
(at least one DISC must be loaded into
changer magazine)
NOTE:
Radio must be in “CD
Mode” when using the JAG
97CD-HF.
CD Changer remains connected and fully functional.
3.
Use radio button to adjust volume
(radio buttons do not operate
Bluetooth module or audio device)
Music Commands
”
Use push-to-talk button to perform the following music and phone functions:
To
Proceed this way
Pause a Song
Press and release button
Resume Play
Press and release button
Skip to next song
Press button twice
Skip to Previous Song
Press button three times
Activate CD Changer Mode*
Press button four times
Activate Voice Control
Press/hold button for 2 seconds
Switch from Aux to Streaming Audio
Press and release button
Phone Commands
To
Proceed this way
Answer call
Press and release button
End call
Press and release button
Reject incoming call
Press button twice (call goes to VM)
Cancel outgoing call
Press button twice
Activate Voice Control
Press/hold button for 2 seconds
