Note: Find a clean power/ground supply behind the dash. If noise is
present consider alternate location or purchase a
USB CHARGING PORT
Module USB port (See
Fig. 11
) is for charging only. Please not this may not
provide sufficient current to charge newer power-hungry devices (e.g., iPhones).
If you own one of these newer devices, consider purchasing our
charging Kit.
You may install the provided USB kit in 1 of 3 ways:
A
.
Flush to dash/panel (requires drilling a ¾
” hole
)
B
.
Flush Mount with Support bracket
(use this option to mount USB wherever
your installation demands without drilling)
C
.
Use your own cable-
(default)
A.
Flush Mount to Dash or Panel
(drilling required)
1.
Drill a ¾” hole in dash or panel using a step drill bit or equivalent (See
Fig. 9
)
Fig. 9
Step drill bit
2.
Insert
3.2ft
. (1 Meter) USB male terminal (See
Fig. 10
) through ¾”
hole created in step 1 and connect to Module USB port (See
Fig. 11
)
Fig. 10
Flush mount 3.2 ft. USB cable
Fig. 11
Module USB port
3.
Snap USB head (See
Fig. 12
) to mounting surface until flush. (See
Fig.
13
)
Fig. 12
Flush mount USB Terminal
