Fig. 13
Flush mounted to dash
4.
Tuck and secure any extra wire from moving parts
Note: Many have reported a flush install to the back wall of the storage
compartment.
B.
Flush mount with Support Bracket
(No drilling)
1.
Locate a flat surface at location of choice within
3.2 ft.
(1 meter) of
module and mount USB support bracket (See
Fig. 14
) using
adhesive/tape or screws.
Fig. 14
USB mounting bracket
2.
Insert USB male terminal through hole in bracket (See
Fig. 15
) and
connect to module USB port (See
Fig. 11
)
Fig. 15
3.
Snap USB head to bracket until flush (See
Fig. 16
)
Fig. 16
4.
Tuck and secure any extra wire away from moving
C.
No USB Mount
(default)
USB port is for
charging only
. Connect your own USB2.0 cable or proceed
to next step if charging is not required.
