Introduction:
Just because you drive an older car does not mean you have to settle for old
technology.
Safety comes first when you’re on the road, so
having an intuitive
and easy to use Bluetooth kit is essential to reducing driver distraction. The
JAG97CD-HF kit is compatible with virtually all Bluetooth phones, and sounds
great whether you are using it for mobile conversations or streaming music. In
addition, the JAG97CD-HF works in select pre-1997 Jaguars
with a functioning
6-disc CD changer
in trunk/hatch. The required CD changer remains
connected and functional. If vehicle does not have a CD changer, purchase our
See
Frequent Asked questions and Feature Comparison
at the end of this
guide
Notes:
- If radio is in AM/FM mode, muting will not occur when initiating/receiving
phone call. Muting is only possible if radio already in Bluetooth Mode (CDC).
- Must use push-to-talk button with built-in microphone included with kit
- a functioning CD changer
is required and remains fully operational
.
Installation:
(connects to radio)
1.
Remove radio from dashboard. For help removing radio, click link
below:
https://www.youtube.com/watch?v=vpAIdr6V3iE
2.
Disconnect CD changer 8-pin plug from radio
“
CD
”
port (See
Fig. 1
)
3.
Connect factory CD changer plug (from step 2) to audio splitter 8-pin
female connector (See
Fig. 2
)
Fig. 1
Radio CD port
Fig. 2
audio splitter
4.
Connect splitter 8-pin male plug to radio
“
CD
”
port vacated in step 2
Fig. 2A
5.
Connect audio splitter 3.5mm right angle plug (See
Fig.2A
) to module
3.5mm pigtail jack (See
Fig. 3)
