Fig. 22
Flush mounted to dash
4.
Tuck and secure any extra wire from moving parts and test operation
B.
Bracket Mount
(No drilling)
1.
Locate a flat surface at location of choice within 3.2 ft. of module to
mount USB support bracket (See
Fig. 23
) using adhesive/tape or
screws (included).
Fig. 23
USB mounting bracket
2.
Insert USB cable male terminal through hole in bracket (See
Fig. 23
)
and connect to installation charging port (See
Fig. 20
Fig. 24
3.
Snap USB cable head (See
Fig. 24
) to bracket until flush (See
Fig. 25
)
Fig. 25
4.
Connect/Tap red or yellow wire to 12V Battery (
Always on
) or 12V
Accessory (key on) supply in vehicle and black wire to ground. See
chart on page 5.
5.
Tuck and secure any extra wire away from moving parts and test
operation (
See Bluetooth Pairing and Connection
)
Bluetooth feature comparison:
Feature
JAG-HF
JAGCD-HF BT45-JAG A2DIY-JAG98 A2DIY-JAG98R
CD changer retention
X
✓
X
✓
✓
Audio input (aux)
✓
✓
*
X
Optional
Optional
Charging (USB)
✓
✓
X
Optional
Optional
Built-in radio mute feature
X
X
✓
X
X
Visor microphone
X
X
✓
✓
✓
Requires CD changer
✓
✓
✓
✓
✓
Voice Recognition
✓
✓
✓
X**
X**
Requires factory phone plug
X
X
✓
X
X
Plug-n-play installation
X
X
✓
X
X
Smart media button (remote)
X
X
✓
✓
✓
Module installs:
Armrest
Armrest
Armrest
Armrest
Radio cavity
*Aux input instead of CD changer
** activate VR on device as customary
