Routing Audio cable (sedan)
1.
Use pry tool to open gap between window pillar and rear deck as seen
in
Fig. 5
. From inside trunk fish audio plug (See
Fig. 4
) through and
into the cabin.
(See Fig. 6)
Fig. 4
Fig. 5
Fig. 6
2.
Pull excess cable and begin tucking under backrest and seat cushion as
you work towards the rear of the center glove box (armrest) as seen
in
Fig. 7,
Fig. 8
and
Fig. 9
Fig. 7
Fig. 8
Fig. 9
3.
Continue to use pry tool or fingers to fish wire under center glove box
to storage bin.
4.
To remove storage bin
: Open the center glove box and remove 2
Philips head screws from latch cover and two more from hinge then
remove the single screw on retainer bracket.
5.
Lift to remove storage bin and set aside.
6.
Locate audio plug fed through in step 3 and
gently pull excess cable.
Note:
The aforementioned steps apply to sedan models. X100 (convertibles)
requires additional steps not part of this guide.
