9
CLOG MAINTENANCE
WARNING:
TO REDUCE RISK OF PERSONAL INJURY - UNPLUG CLEANER BEFORE SERVICING
ANY OTHER SERVICING SHOULD BE DONE BY AN AUTHORIZED SERVICE REPRESENTATIVE
CUSTOMER SERVICE (1-800-321-1134)
In the event that further assistance is required, see your Yellow Pages for an authorized Royal
®
Dealer. Costs of any transportation to and
from any place of repair are to be paid by the owner. The service parts used in this unit are easily replaced and readily available from
an authorized Royal
®
Dealer or retailer. Always identify your cleaner by the model number and manufacturing code when requesting
information or ordering replacement parts. (The model number appears on the bottom of the cleaner.)
PROBLEM
POSSIBLE REASON
POSSIBLE SOLUTION
Cleaner won’t run
Cleaner won’t
pick-up or low
suction
Dust escaping
from cleaner
1. Power cord not firmly plugged into
outlet.
2. Blown fuse or tripped breaker.
3. Needs service.
4. Thermal Protector activated.
1. Dirt container not installed correctly.
2. Dirt container full.
3. Brushroll worn.
4. Broken or worn belt.
5. Clogged filter.
6. Nozzle/brushroll clogged.
7. Hose clogged.
1. Dirt container full.
2. Dirt container not installed correctly.
3. Hose not installed correctly.
4. Filter not installed completely.
TROUBLESHOOTING GUIDE
1. Plug unit in firmly.
2. Check fuse or breaker in home. Replace
fuse/reset breaker.
3. Take to service center or call 1-800-321-1134.
4. Unplug cleaner - allow to cool.
1. Review dirt container removal & replacement -
Pg. 7.
2. Empty dirt container - Pg. 7.
3. Replace brushroll - Pg. 8.
4. Replace belt - Pg. 8.
5. Remove filter and clean - Pg. 7.
6. Check nozzle/brushroll; remove obstruction/clog -
Pg. 8.
7. Remove hose; remove clog - Pg. 9.
1. Empty dirt container - Pg. 7.
2. Review dirt container removal & replacement -
Pg. 7.
3. Review hose installation - Pg. 9.
4. Review filter removal & replacement - Pg. 7.
TOOL REQUIRED: PHILLIPS SCREWDRIVER
WARNING:
TO REDUCE THE RISK OF INJURY FROM MOVING PARTS - UNPLUG BEFORE CLEANING CLOG.
NOTE:
First check brushroll for clog, if clog persists, then check lower hose.
Locate lower hose/clog clean-
out (see “FEATURES”, number
15 for location).
Replace lower hose and
replace one (1) screw.
2.
1.
Remove one (1) screw and pull
lower hose down and away from
cleaner. Remove obstruction.
3.
