Notes
DIRECTV Wireless Cinema Connection Kit
TM
DIRECTV Field Operations Training
©DIRECTV 2011
DIRECTV CCK
Version1.3.0
24
Troubleshooting
LEDs
Activity
This LED is green when the Whole-Home DVR service network is
established. Both the wireless connection and a wired connection
(either Ethernet or Coax) must be established. It flashes when data
is being transmitted through the CCK-W. The LED is off when no
Whole-Home DVR service coax network is established.
Coax Network
This LED indicates that the Whole-Home DVR service network
is operational. When the light is steady green, it means a good
MoCA coax network is established with full bandwidth. When the
light is steady yellow, it means the MoCA coax network is estab-
lished, but with degraded bandwidth. The coaxial distribution
should be checked to ensure all devices in line are DIRECTV-ap-
proved; splitters, coax cable, wall-ports, etc. This LED is off when no
MoCA coax network is established. LED off is expected when using
an Ethernet connection.
AP/STA
AP is for possible future implementation testing only.
LED Definitions
LED
Label
Possible
Status
Definition
Troubleshooting Tips
POWER
Solid
Green
Power is on,
device is
booted
Solid green is normal.
Flashing
Green
Device is
booting up
Wait for 30 seconds. If LED is
not solid, unplug
the power from the W-DCCK
device, wait 10 seconds,
then plug in the power to the
W-DCCK device.
Off
Device is
not pow-
ered
Check to ensure the power
adapter is plugged into
the W-DCCK device and into
an electrical outlet.
