DirecTV HR, User Manual

Page: 71 / 132

CHAPTER 6 -
Settings
Chapt
er
1
Chapt
er
2
Chapt
er
3
Chapt
er
4
Chapt
er
5
Chapt
er
6
Chapt
er
7
Chapt
er
8
71
System Setup
Satellite
This option is used by installers when your system is initially set up; you
should not have to use it. However, you can use this screen to view the
satellite signal strength your receiver is getting or to repeat the satellite
setup procedure.
When the MODE switch on your remote is in the left-most position, it controls
your DIRECTV Receiver. However, you can also program the AV1, AV2 and TV
positions to control other equipment such as your TV, DVD, VCR or Stereo.
Select “Remote” and then select either “Program Remote”, “IR/RF Setup”, or
“Receiver Mode”.
Remote Control
Follow the step-by-step instructions to set your remote to control your TV
or other A/V equipment such as, a DVD player or surround sound system.
For best results, it is helpful to know the model number and brand of your
equipment.
This is also where you’ll have the option to “Reset Remote” which clears
the AV1, AV2 and TV modes.
Program Remote