DirecTV HR, User Manual

Page: 14 / 132

14
DIRECTV
®
PLUS DVR
USER GUIDE
Mode Switch
These two buttons turn your TV and DIRECTV
®
Receiver on or off together. If
your DIRECTV
®
System was installed professionally, your remote has already
been programmed to operate your TV. If you need to reprogram the remote
for a new TV or other audio-visual equipment, press MENU, select Parental,
Fav’s & Setup, then System Setup, then Remote, and follow the step by step
instructions.
Use the POWER (PWR) button and Mode Switch to turn a single component
on or off (for example a DVD player or surround sound system). Simply slide
the mode switch to the position that matches the component you want to
control and then use the POWER button to turn it off or on. The mode switch
must always be in the left-most position to control your DIRECTV
®
Receiver.
If the mode switch is in a position that has not been programmed, or if you
press a button that is not supported by that particular piece of equipment, an
onscreen message will pop up to alert you.
Turning Your Equipment On and Off
Note
: Each time you press a button, a green light at the top of the remote
flashes. If the light flashes several times for just one press, it means the
batteries (size AA) are getting low and need to be replaced.
Your Remote Control