background image

HUGHES BRAND DIRECTV PLUS™ DIGITAL SATELLITE RECEIVER

P

AGE 

6-8

Channel List

The Lists pop-up menu enables you to filter the guide to display only channels from the selected list. In
addition to 

All Channels

, you can choose one of your own defined

lists. See the “Fav. Lists” section of “DIRECTV PLUS™ Digital
Satellite Receiver’s Menu System” to learn how to set your favorite
lists.

You can use the 

 key to cycle through the lists at any time in

the on-screen guide without using the drop-down menu. The 

Top-10

list can only be selected via the drop-down menu.

The “Top 10” favorite list is automatically maintained by the digital
satellite receiver. The digital satellite receiver monitors the channels
viewed in your household and compiles the ten most watched
channels on the list. As viewing habits change, the list will update
itself accordingly.

It should be noted that all channel lists are maintained privately within the digital satellite receiver for
your use only.

Guide Times

The 

Guides

 pop-up menu ordinarily provides easy access to future programming information. Simply

select one of the hour offsets from the current time. After a few
seconds, the selected guide will appear.

Another type of guide that may be offered is a list-type guide. These
guides do not represent channels and time, but rather a list of
possible options. These guide types are very rare.

Class Filters

Another way to filter the guide is by using the 

Classes

 menu. From this menu you can select

classifications including the following:

 

Subscrptn

 will exclude the PPV channels from the on-screen

guide.

 

PPV

 will list only channels offering PPV programs.

 

Schedule

 will list channels that have events you have scheduled.

 

Other options may be listed since DIRECTV can update this list
via the satellite.

The Lists pop-up menu

The Guide Times pop-up menu

The Classes pop-up menu

Summary of Contents for HIRD-E4



























































































Reviews: