21
21
CHANGING VOLUME LOCK
Depending on how you set up your remote, the
VOL
and
MUTE
may control the volume only on your TV, regardless
of the position of the
MODE
switch. This remote can be set
up so that the
VOL
and
MUTE
keys work
only
with the
component selected by the
MODE
switch. To enable this
feature, perform the following steps:
1.
Press and hold the
MUTE
and
SELECT
keys at the same
DIRECTV
position
2.
Using the number keys, enter
9-9-3
.
(The green light
flash twice.)
3.
Press and release the
VOL
+
key. (The green light
flashes 4 times.)
Now the
VOL
and
MUTE
keys will work
only
for the
component selected by the
MODE
switch position.
Locking Volume to AV1, AV2 or TV
1.
Slide the
MODE
switch to the
AV1
,
AV2
or
TV
position to
lock the volume.
2.
Press and hold the
MUTE
and
SELECT
keys at the same
3.
Using the number keys, enter
9-9-3
.
(The green light
flashes twice.)
4.
Press and release the
SELECT
key. (The green light
flashes twice.)
NOTE:
DIRECTV
®
Receivers don’t have volume control,
so the remote will not allow the user to lock vol-
ume to the DIRECTV mode.
ACTIVATING AND DEACTIVATING THE RF
TRANSMITTER
Your DIRECTV Remote Control features RF (radio
frequency) capability. When you activate the RF feature of
your remote control, you can control your DIRECTV
Receiver from anywhere in your home. You do not need to
be within the line of sight of your receiver to control it.
NOTE:
Not all DIRECTV Receivers are RF-capable. Also,
some RF-capable DIRECTV Receivers include integrated
RF antennas and do not require an external antenna. If
your receiver requires the external RF antenna, before
activating the RF transmitter, locate the RF antenna
included with your remote control and insert it into the RF
remote antenna coaxial connector on the back of your
DIRECTV Receiver.
Activating the RF Transmitter
To activate the RF transmitter on your DIRECTV Remote
Control, perform the following steps:
1. Locate the 12 digit Receiver ID (RID) number of your
DIRECTV Receiver. You can find the RID number on
the back panel of your receiver, or inside the CAM
access door next to the reset button.
DIRECTV RC65RBX.fm Page 21 Wednesday, May 5, 2010 6:25 PM
time until the green light under the
flashes twice, then release both keys.
time until the green light under the selected switch
flashes twice, then release both keys.
CHANGING VOLUME LOCK
Depending on how you set up your remote, the
VOL
and
MUTE
may control the volume only on your TV, regardless
of the position of the
MODE
switch. This remote can be set
up so that the
VOL
and
MUTE
keys work
only
with the
component selected by the
MODE
switch. To enable this
feature, perform the following steps:
1.
Slide
MODE
switch to
DIRECTV
. Press and hold th
2.
Using the number keys, enter
9-9-3
.
(The green light
will flash twice )
3.
Press and release the
VOL
+
key. (The green light
flashes 4 times.)
Now the
VOL
and
MUTE
keys will work
only
for the
component selected by the
MODE
switch position.
Locking Volume to AV1, AV2 or TV
1.
Slide the
MODE
switch to the
AV1
,
AV2
or
TV
position to
lock the volume.
2.
Press and hold the
MUTE
and
SELECT
keys at the same
3.
Using the number keys, enter
9-9-3
.
(The green light
flashes twice.)
4.
Press and release the
SELECT
key. (The green light
flashes twice.)
NOTE:
DIRECTV
®
Receivers don’t have volume control,
so the remote will not allow the user to lock vol-
ume to the DIRECTV mode.
time until the green light under the selected switch
flashes twice, then release both keys.
.
es
MUTE
and
SELCT
keys at the same time until the green
e
then release both keys.
light under the
DIRECTV
position flashes twice, then