19
19
CONTROLLING OTHER COMPONENTS
The
AV1
and
AV2
switch positions can be setup to control a
VCR, DVD, Stereo, second DIRECTV Receiver or second TV.
We recommend you use the onscreen steps described
on page
8, but you can also use the manual method below:
1.
Turn on the component you wish to control (Ex. your
DVD Player).
2.
Locate the 5-digit code for your component. (See
“Setup Codes, Other Devices” starting on page 25.)
3.
Slide the
MODE
switch to the
AV1
(or
AV2
) position.
4.
Press and hold the
MUTE
and
SELECT
keys at the same
time until the green light under
AV1
(or
AV2
) flashes
twice, then release both keys.
5.
Using th
keys, enter the 5-digit code for the
brand of component being set up. If performed
correctly, the green light under the selected position
flashes twice.
6.
Aim the remote at your component and press the
PWR
key once. The component should turn off; if it does
not, repeat steps
, trying each code for your
brand until you find the correct code.
7.
Repeat steps 1 through 6 to set up a new component
under
AV2
(or
AV1
).
8.
For future reference write down the working code for
the component(s) set up under
AV1
and
AV2
below:
AV1:
COMPONENT:
___________________
AV2:
COMPONENT:
___________________
SEARCHING FOR TV, AV1 OR AV2 CODES
If you were unable to find the code for your brand of TV or
component, you can try a code search. This process may
take up to 30 minutes.
1.
Turn on the TV or component. Insert a tape or disk if
applicable.
2.
Slide the
MODE
switch to the
TV
,
AV1
or
AV2
position,
as desired.
3.
Press and hold the
MUTE
and
SELECT
keys at the same
time until the green light under the selected switch
position flashes twice, then release both keys.
DIRECTV RC65RBX.fm Page 19 Wednesday, May 5, 2010 6:25 PM
4 - 6
umber
e n
