18
18
CONTROLLING YOUR TV
Once you have successfully set up your DIRECTV Remote
to operate your DIRECTV Receiver, you can set it up to
control your TV.
We recommend you use the on-screen
steps described on page
8, but you can also use the
manual method below:
1.
Turn on the TV.
NOTE
:
Please read steps 2-5 completely before proceed-
ing. Highlight or write down the codes and com-
ponent you wish to set up before moving on to
step 2.
2.
Locate the 5-digit code for your TV. (See “
Setup
Codes for TVs
” on page 25.)
3.
Slide the
MODE
switch to the TV position.
4.
Press and hold the
MUTE
and
SELECT
keys at the same
time until the green light under the TV position
flashes twice, then release both keys.
5.
Using the number keys enter the 5-digit code for your
brand of TV. If performed correctly, the green light
under
TV
flashe twice.
6.
Aim the remote at your TV and press the
PWR
key
once. Your TV should turn off. If it does not turn off,
repeat steps
, trying each code for your brand
until you find the correct code.
7.
Slide the
MODE
switch to the
DIRECTV
position. Press
TV POWER
. Your TV should turn on.
8.
For future reference, write down the working code for
your TV in the blocks below:
ING UP TV INPUT
KEY
TV INPUT
key, follow the steps
1.
Slide the
MODE
switch to the
TV
position.
2.
Press and hold the
MUTE
and
SELECT
keys at the same
3.
Using the number keys enter
9-6-0.
(The green light
under the
TV
position flashes
.)
DIRECTV RC65RBX.fm Page 18 Wednesday, May 5, 2010 6:25 PM
s
4 - 6
SELECT
DEACTIVAT
If you want to deactivate the
below. Pressing the
TV INPUT Key
will now do nothing.
time until the green light under the
TV
position flashes
flashes twice, then release both keys.
four times
