16
933.TL2 4.12.193.2 2015 Toyota Sienna (Smart Key)
© 2021-02-19 Directed. All rights reserved.
Module programming for security-only installations
Refer to "LED diagnostics and troubleshooting" for more information and for troubleshooting purposes.
To connect the module:
1
Please
ensure
that the vehicle is in a safe location and cannot move forward during
programming. For vehicles equipped with a manual transmission, make sure the gearshift
lever is in the neutral position.
2
DS3+: Connect
the 12-pin main power harness to the DS3+ module
FIRST
.
Wait
until the LED turns ON solid orange before proceeding to the next step.
Solid
Must connect
12-pin FIRST
4
2
4
4
2
22
8
10
12
DS3/DS3+
DS4+: Connect
the 12-pin main power harness to the DS4+ module
FIRST
.
The LED will turn ON solid blue for 1 second to confirm Bluetooth communication.
Wait
until the LED turns ON solid orange before proceeding to the next step.
Solid
Solid
x1 Sec
Must connect
12-pin FIRST
4
2
4
4
2
22
8
10
12
DS4/DS4+
3
Connect
the remaining harnesses to the module.
Connect
remaining
harnesses
4
Press
twice on the Push-to-Start (PTS) button to turn the ignition ON, and
wait
until the LED
turns OFF.
&
Off
5
Press
once more on the PTS button to turn the ignition OFF.
6
Pair
remotes (if applicable). For information on how to pair a specific remote, please
refer to its corresponding owner documentation, which can be found inside the product
packaging of the complete system or on www.directechs.com.*
Pair
remotes*
* Your aftermarket remote may differ from the model shown in the illustrations.
You have successfully completed the module programming sequence.
