6
©
2013
Directed. All rights reserved.
DIPSWITCH 4:
NOT USED.
DIPSWITCH 5, siren input polarity:
In the OFF position the 535T will close the windows when a (+) positive is received on the Brown
H3/5 wire of the 535T. In the ON position the 535T will close the windows when a (-) negative
is received on the Brown H3/5 wire of the 535T.
NOTE: The siren trigger feature will only work when the Brown H3/5 wire of the 535T is wired to an
aftermarket security system and the windows will need to be in the down position with the security system
in the armed state.
DIPSWITCH 6, pre-warn or full trigger close:
In the OFF position the 535T after a 2 second delay will roll the windows up when the security
system is in “Full Trigger” mode.
In the ON position the 535T will immediately roll the windows up when the security system is in
“Warnaway” mode.
NOTE: The brown H3/5 wire needs to be connected and the correct polarity selected (see dip switch
5 settings) for this feature to work. When dipswitch #6 is in the ON position (warn away mode) and the
535T is tied into a security/remote start system, if the windows are in the down position and the vehicle
is remote started the windows will roll up if the system is armed or disarmed during the remote start time
period. To bypass this function, you can either program off the anti-grind feature of a Directed system or
perform the silent arm/disarm command with the system.
