17
© 2 0 0 1 d i r e c t e d e l e c t r o n i c s , i n c .
valet take-over
A vehicle equipped with the Valet Take-Over system can remain
running after the key is removed from the ignition. This feature
is useful for occasions when you wish to exit the vehicle for short
periods of time, but would like to leave the motor running and
the climate controls on.
To perform Valet Take-Over:
1. Before turning off the engine, press and release
(or
press and release the optional momentary switch).
2. Turn the ignition key to the OFF position. (The engine will
stay running.)
3. The engine will run until the pre-programmed time elapses
or a shut-down input is received. (See the previous section
for a complete list of shut-down inputs.)
timer mode
Timer Mode automatically starts your vehicle engine and runs it
for a pre-programmed time period, every three hours for a total
of six operation cycles. Timer Mode helps to ensure that your
engine will start in the morning after being parked outside
during a night of extremely cold temperatures.
important!
This feature must only be used in open areas,
never in an enclosed area such as a garage.
➜
note:
This feature will not work if the brake pedal is being pressed.
➜
