27
© 2 0 0 1 d i r e c t e d e l e c t r o n i c s , i n c .
programmed to prevent the door from locking when the
ignition is turned on with any door open. If your installer is
programming the security system with the Directed
®
Bitwriter or a personal computer and the TechSoft
Programmer, ignition lock and unlock are independent
features and can be programmed separately.
➤
➤
Passive door locking (with passive arming) or
active door
locking
(only when arming with the transmitter). Passive
locking allows the vehicle's doors to lock when the security
system passively arms (after the 30-second countdown). This
feature only works if passive arming has been programmed.
➤
➤
Panic mode
enabled
/disabled when the ignition is turned on.
(Some states have laws against sirens sounding in moving
cars.)
➤
➤
Forced passive arming
on
or off. If your security system is
programmed for passive arming and the forced passive
arming feature has been programmed on, the system will
passively arm after one hour, even if a protected entry has
been left open. Forced passive arming ensures that the
system will be armed if a door has accidentally been left ajar
when leaving the vehicle.
note:
When the system passively arms after one hour, the
entry point that has been left open, and anything con-
nected to the same zone, is bypassed and cannot trigger
the system. However, the remaining inputs to the system
are fully operational.
