41
© 2 0 0 3 d i r e c t e d e l e c t r o n i c s , i n c .
➤
When a Tamper Alert notification is generated upon
disarming, the triggered zones will flash continuously on the
transceiver LCD until reset by the ignition.
➤
To review the zones that have been triggered press the
button. They flash five times, then turn off.
c
co
od
de
e h
ho
op
pp
piin
ng
g
The receiver and transmitters use a mathematical formula called
an algorithm to change their code each time the transceiver is
used. This technology has been developed to increase the secu-
rity of the unit. The control unit knows what the next codes should
be. This helps to keep the transceiver “in sync” with the control
unit even if you use the transceiver out of range of the vehicle.
However, if the transceiver has been pressed many times out of
range of the vehicle, or the battery has been removed, it may fall
out of sync with the control unit and fail to operate the system.
To re-sync the transceiver simply press
several times within
range of the vehicle. The alarm will automatically re-sync and
respond to the transceivers normally.
