The transceiver will beep (or vibrate) continuously when the
system enters panic mode. The transceiver will not generate a
page notification when panic mode is exited.
valet mode
You can prevent your security system from passive arming by
using Valet mode. This is very useful when washing the vehicle
or having it serviced. In Valet mode, the security system will not
arm, even with the transceiver, but all convenience functions
(door locks, trunk release, remote starting, etc.) will continue to
work normally.
To enter or exit Valet mode:
1. Turn the ignition on.
2. Turn the ignition off.
3. Press and release the Valet
switch within 10 seconds.
The status LED will light solidly if you are entering Valet mode,
and it will go out if you are exiting Valet mode.
The transceiver will not generate a page notification when
entering or exiting Valet mode using the Valet switch.
To enter or exit Valet mode using the transceiver:
1. Open any vehicle door.
2. Press .
3. Press .
DRW-35
➜
29
© 2 0 0 3 d i r e c t e d e l e c t r o n i c s , i n c .
