40
© 2 0 0 3 d i r e c t e d e l e c t r o n i c s , i n c .
interpreting zone diagnostics
Warn Away responses are not reported by the arming or
disarming diagnostics. If you receive a Bypass notification when
arming or a Tamper Alert notification when disarming, look at
the LED or transceiver LCD. Active or triggered zones will be
indicated by a pattern of blinks by the LED or the transceiver
icon will indicate the triggered zone.
Example
If Zone 3 was active or triggered, the LED will blink three times
with a two-second pause. Then it will blink three times again,
and repeat until the ignition is turned on and the door icon (9)
will be displayed on the transceiver.
➤
Arming and disarming diagnostics (including Warn Away
®
responses) are reported by the transceiver on the LCD.
➤
When a Bypass Notification is generated during arming the
transceiver LCD will flash until the alarm is reset by the
ignition.
➤
To review zones that have been bypassed press
10
seconds after arming the system. The bypassed zones will
flash until the alarm is reset by the ignition.
note:
Your system stores the last two triggered zones in
memory. If your system has been triggered but the LED
has been reset by turning on the ignition, your dealer can
still recall the last two zones that were triggered. Contact
your dealer for details.
➜
