4. In gasoline vehicles, the engine will start four seconds after
the parking lights flash. In diesel vehicles, the engine will
start when the WAIT-TO-START indicator on the vehicle's
dash goes out.
5. Once the vehicle has started, it will run for the pre-program-
med period of time (either 12, 24, or 60 minutes - see
Programming Options
section of this guide) or until a shut-
down input is triggered. When using the Directed Bitwriter,
the run time can be programmed from 1-60 minutes.
When you are ready to drive the vehicle:
1. Insert the ignition key and turn
it to the ON (not the START)
position.
2. Press the brake pedal.
note:
If the brake pedal is pressed before the key is in the
ON position, the engine will shut down.
important!
It is unsafe to operate a vehicle’s motor in a
garage or other closed off area. Breathing the exhaust
from the vehicle is hazardous to your health. Never acti-
vate the remote start in an enclosed space.
note:
The transceiver will generate a Page Notification
with a different unique two-tone beep (or vibrate) and
the remote start (19) icon will turn off when the remote
start shuts down.
31
© 2 0 0 3 d i r e c t e d e l e c t r o n i c s , i n c .
