Page Recognition Mode
The transceiver will leave a zone icon illuminated when it has
received a triggered response and will wait for violation recogni-
tion. Press any button on the transceiver, the LCD information
and alarm page alerts will be cleared.
u
ussiin
ng
g yyo
ou
urr ssyysstte
em
m
active arming
Press
for one second to arm the system. The vehicle’s lights
will flash once, the doors will lock, the siren will chirp once, and
while the system is armed, the status LED will blink approxi-
mately once per second to indicate the system is actively
protecting the vehicle.
The transceiver will beep once (or vibrate). The arm icon (29)
will appear and remain displayed on the LCD.
Bypass Notification
If the siren chirps again, the transceiver beeps again, and the status
LED blinks in a pattern, a protected entry or sensor input is active
and its icon will be displayed on the transceiver LCD. This is
called bypass notification. Refer to the
Diagnostic
section of this
manual for information about bypass notification.
➜
note:
The transceiver buttons will not send a command
to the system until the alarm page is cleared.
18
© 2 0 0 3 d i r e c t e d e l e c t r o n i c s , i n c .
