3
4-Camera H.264 Security System Setup Guide
SECTION 2: GETTING STARTED
2.2 What you need
Although each security system installation is different, most require the following items not included with your system
components:
•
Tools to install the cameras and route power and video cables
•
Fasteners to attach the cameras to the mounting surfaces
•
A display device and cabling to connect it to the DVR. The DVR will connect directly to a VGA video monitor, or to a TV with a
BNC to RCA adapter and RCA cable. The display device is usually needed only for system setup. It can be disconnected when
the DVR is networked for access across a LAN or Internet.
•
Uninterruptible power supply (UPS). This device is used to ensure system stability during voltage surges, sags, and outages. If
a UPS is not available, a power strip with strong surge protection is highly recommended.
•
If you purchased your DVR without a hard disk drive (HDD), you must install one. See “APPENDIX C HDD Installation” on
page 82 for more information.
