Go to table of contents
DCS_Direct_Jet_1024UVMVP
_Getting_Started_Guide_1.2_030314
24 |
P a g e
Perform six initial charges.
After the sixth initial charge is complete run a nozzle check on the provided vellum paper by
right clicking on the nozzle check file in the nozzle check queue (tab) and selecting print.
If the nozzle check is missing nozzles, run an additional initial charge. Once the charge has
completed, run a nozzle check. Continue this process until an acceptable nozzle check is
achieved.
Good Nozzle Check
Poor Nozzle Check
In the Color Byte Rip 9.1 Queue click on the Device Properties icon.
Click on Reset Ink Pad Counter. You must
immediately restart the
print engine
. It cannot be done the following day.
Note
The waste ink pad counter should be reset at least once per week during normal operations. Failure to
do so may result in downtime and the need to contact DCS Technical Support for resolution.
