Go to table of contents
DCS_Direct_Jet_1024UVMVP
_Getting_Started_Guide_1.2_030314
13 |
P a g e
Control Screen
Your 1024UVMVP is equipped with a 3.5” (89mm) color LCD touch screen display which
provides interactive feedback, on-demand printer status, and ink levels. Switching the Main
Power on will bring up the Main Control Screen.
Press the
icon at any time to return to this screen
Print Engine Power
The lights on this button display the current status of your 1024UVMVP
Amber Light: When the amber light (Standby Power) is on, there is power to the printer but not the
print engine. You will not be able to print in this state but you can move the print engine up and down
and the media table back and forth. With the amber light lit and by pressing the On/Off green button,
the print engine will be lifted approximately 3" (76mm) and the media table will move all the way to
the right.
Solid green: The green light will light up or blink signifying that there is power to the print engine.
Blinking green: When the green light is blinking, there is data being transferred from the PC to
the printer or the printer is busy. After turning on the main power, always
wait 5 seconds
before turning on the print engine.
Whenever the main power switch is turned off, wait 15 – 30
seconds before turning the main power switch back on.
Print Error
The lights on this button designate an error condition. Press this button at any time to bring up the
error information screen.
Error Information Screen
The lights on this screen mirror the lights found on the Print
Engine Power and Print Error buttons.
Press the printer state that matches the actual light configuration
of the machine to learn more about the error.
Head Clean/Carriage Unlock
Press and hold this icon for 9 seconds to begin a light head clean. Press it briefly to unlock the
carriage.
Lift Print Engine
Pressing this button when the power is on will lift the print engine up. This should be used to