8
When cutting through the covering
to remove it, cut with only enough pressure
to only cut through the covering itself. Cut-
ting into the balsa structure may weaken it.
3) Slide the vertical stabilizer back in place.
Using a triangle, check to ensure that the ver-
tical stabilizer is aligned 90º to the horizontal
stabilizer.
Control horn installation as same as meth-
od of aileron wing. See pictures below.
CONTROL HORN INSTALLATION.
Pen.
Remove covering.
90º
Ve
rtica
l
Stabilizer.
Horizontal
Stabilizer.
Hinge.
C/A glue.
Elevator control horn.
